Saturday, 28 April 2012

All Android tweaks in a single Flashable .zip file - Boost your performance and battery life with no Harm







This is a zip file that contains all (most) of the tweaks available here in RK worls. It's so amazing. There is no risk of bricking or something else as it only contains some scripts that execute at boot

What's included ? :

-> Build.prop script

-> loopy smoothness tweak
(credits to lpy)

-> CFSK script,sqlite_optimize script,touchscreen tweak(ALL THESE 3 FROM Thunderbolt!)(credits to Pikachu01)

-> Screenstate_Scaling tweak (Credits to Slaid480)

-> Cleaning script That clears dalvik-cache and cache useless files
(Credits to Slaid480)

-> Kernel tweaking script (No need to download sysctl.conf anymore )
(Thanks to booster buster tweak)

-> Governor tweaks and some more minor tweaks

-> defragging script, zippaligning <-(credits to darky)(credits to gabwerkz)

-> UI tweaks,sd card tweaks and performance tweaks(credits to DynamicRam)

-> Disabled Verify-bytecode For Better resposing and More free RAM(credits to nibraas_reeza)

-> Live wallpapers hack in order to make them smoother (credits to despotovski01!)

-> System_server from Fugu tweaks(credits to ForeverSupra)

-> Sqlite optimizer from Lightning zap tweaks(credits to thomas.raines)

-> Speedy tweaks(credits to 0vermind)

-> Logger disabling script(If you want your logger to work then delete 02logger)





INSTALLATION : SIMPLY FLASH THROUGH CWM RECOVERY


..Benefits after flashing the zip ..

Vm management memory tweaks so that your apps perform better
The Loopy smoothness tweak that tweaks your launcher and system UI
Zippaligning and Verify-Bytecode tweak fore More free and Less RAM usage
SD card tweak for better read/write speed
Kernel tweaks for more battery life and slightly more performance!

Less lag in phone calls
better scrolling in contacts/menus/folders/homescreen
Smoother live wallpapers!!
System_server from android 4.0 for efficient system funcionality and performance!
System processes priority tweaks (phone,sms etc..)Makes switching between them faster!!
Build.prop tweaking script for battery/performance etc...
Optimized sqlite and I/O tweaks for better quadrant scores/other benchmarking apps

More...

YOU CAN ALSO TRY OUT THOSE BUILD.PROP TWEAKS

[SOME BUILD.PROP TWEAKS THAT CAN ALSO HELP]
(just open build.prop and copy them to the end of the file.Please report if they work on your phone/rom )


[EXPERIMENTAL](Thanks Master&Slave :P )
This might give you better video recording and picture taking results

ro.media.capture.maxres=8m
ro.media.capture.fast.fps=4
ro.media.capture.slow.fps=120
ro.media.panorama.defres=3264x1840
ro.media.panorama.frameres=1280x720
ro.camcorder.videoModes=true
ro.media.enc.jpeg.quality=95

(wi-fi speed increase tweaks)

net.ipv4.tcp_ecn=0
net.ipv4.route.flush=1
net.ipv4.tcp_rfc1337=1
net.ipv4.ip_no_pmtu_disc=0
net.ipv4.tcp_sack=1
net.ipv4.tcp_fack=1
net.ipv4.tcp_window_scaling=1
net.ipv4.tcp_timestamps=1
net.ipv4.tcp_rmem=4096 39000 187000
net.ipv4.tcp_wmem=4096 39000 187000
net.ipv4.tcp_mem=187000 187000 187000
net.ipv4.tcp_no_metrics_save=1
net.ipv4.tcp_moderate_rcvbuf=1

DOWNLOAD THE FILE AT THE END OF THE POST(will upload to mediafire the next release) ^^


[SetCPU]
Are you using "on demand scaling"?You might wanna try these
Sampling -> 200000
Up Threshold -> 50
Down Thresold ->25
Ignore Nice Load -> 0

{Up/down thresold is responsible for scaling up/down CPU frequency(That means that when cpu hits the % you have set the prossecor will scale up and hit from (example) 245 mhz to 400 mhz
50% is fair because if you set it too high the phone will be slow and unresponsive.On the other hand if you set it to low then it will drain your battery faster


ALWAYS HAVE A BACKUP AVAILABLE IN CASE SOMETHING GOES WRONG

Download:

sysctl.conf.txt
TweakZV6.zip

 

Filled Under:

9 comments:

  1. can I flash this on my Samsung galaxy fit

    ReplyDelete
  2. ya sure... its for all android mobiles.... but backup before trying anything

    ReplyDelete
  3. hi,

    when i tried to install, via recovery, it says
    E:Error in /sdcard/TweakZV6.zip
    (Status 0)
    Installation aborted

    any idea how i can install it?

    ReplyDelete
  4. hi,

    when i tried to install, i received error message that installation has aborted. Any suggestions? should i wipe dalvik cache first? I tried that too, but it did not work

    ReplyDelete
    Replies
    1. In that case, extract all the files in the zip and COPY-PASTE to the root folder and reboot your phone...

      Please DO have a backup, before trying anything...

      Delete
    2. jz copy into the root of the sdcard and reboot?
      i don't need to install it in recovery?

      Delete
  5. IN Case if you are getting any error to install in recovery, just copy the extracted files and REBOOT....

    ReplyDelete
  6. I don't understand where you must copy the extracted files...in which folder you must copy the files?

    ReplyDelete
  7. when u extract it, you will find a folder called system... using ROOT EXPLORER copy the contents in SYSTEM folder and paste inside the folder SYSTEM which you get when u open the ROOT EXPLORER. COPY + PASTE + REPLACE(if asked).


    TRY THIS ONLY IF ARE GETTING ERROR IN RECOVERY. DO HAVE A BACKUP BEFORE TRYING THIS.

    ReplyDelete